Wallpapering instructions for photo wallpaper
Here we have put together an installation guide for our photo wallpaper. With it you can hang everything yourself with ease. How the non-woven wallpaper gets onto the wall – step by step and clearly illustrated. Success guaranteed.
Detailed information can be found in the technical data sheets of the individual products.
Preparing the substrate
For all photo wallpaper we recommend preparing the substrates first (as for all non-woven wallpaper). The wall you are wallpapering should be clean and smooth. Absorbent substrates should be primed with a water-based deep-penetration primer. If necessary, you should also use such a primer to consolidate plaster surfaces.
If you don't want to hang the wallpaper yourself, you can choose a professional by postcode in our company directory.
Wallpapering step by step

❶ Traditional wallpaper – wallpapering instructions with paste

1. Process using the paste-the-wall method without soaking time.

2. Glue the wallpaper edge to edge.

3. Press the wallpaper strip on with a foam roller.

4. Trim overhangs at ceilings, skirting boards, windows etc. with a utility knife and a putty knife.

5. At corners and edges, cut off the wallpaper strip and apply the following strip edge to edge.

❷ Self-adhesive wallpaper – wallpapering instructions for “self-adhesive” (without paste)
Wallpapering as above, but without paste (steps 2-5). You will find the material in the material description.

❸ Pre-pasted wallpaper – wallpapering instructions for “pre-pasted” (without paste)
Application: Just spray the wall with water and apply the wallpaper immediately. The activation time of the adhesive layer is about 1 minute. Watch our video guide.

❹ Vinyl stickers – without paste
Vinyl stickers are applied without paste: simple wet or dry installation. More on this in the material description.

